Availability: | |
---|---|
Quantity: | |
Hydraulic Edge of Dock Leveler
Suitable for occasions where the difference in truck and dock height is small.
No foundation pit required
Power supply use, easy to operate
Save time and space
Model: | MDS-HEOD-1000 |
Load capacity: | Dynamic load10T |
Platform size: | W1830-2130*L660*H200 |
Foundation pit size: | Without |
Color: | Grey/Blue/Black/Customized |
Main board: | 16mm thick*L400MM, BENSTEEL anti-skid checkered steel plate |
Lap small board: | 10mm thick, non-slip checkered steel plate |
Skeleton under the table: | 5*10mm |
Link hinge: | 12mm thick open hinge |
Connection shaft: | Shaft diameter 20mm |
Adjustment range: | +150/-100mm |
Anti-collision rubber size | 200*300*110mm |
Safety foot guard: | Without |
Adjustment time: | Rise and fall for 5 seconds |
Surface treatment: | The surface is pickled, derusted and sandblasted, and the antirust paint, primer and topcoat are sprayed with automatic spraying equipment, and the thickness of the paint layer is 0.1mm. |
Hydraulic oil tank capacity: | 5L |
Mechanical Edge of Dock Leveler
No power required
No need to reserve a foundation pit, saving space
Stable performance and simple operation
Factories, workshops and warehouses which are especially in the field of food, supermarkets, assembly, logistics, warehousing and etc.
Suitable for when the difference in truck and dock heights is small
The lip plate is lifted to the rear of the truck
Use shot blasting to remove rust and electrostatic spray to enhance corrosion resistance and adhesion
Provide cost saving on equipment maintenance, fragile goods damage and personal injuries
Do not need to reserve pits, supply power, just wall mounted
Hydraulic Edge of Dock Leveler
Suitable for occasions where the difference in truck and dock height is small.
No foundation pit required
Power supply use, easy to operate
Save time and space
Model: | MDS-HEOD-1000 |
Load capacity: | Dynamic load10T |
Platform size: | W1830-2130*L660*H200 |
Foundation pit size: | Without |
Color: | Grey/Blue/Black/Customized |
Main board: | 16mm thick*L400MM, BENSTEEL anti-skid checkered steel plate |
Lap small board: | 10mm thick, non-slip checkered steel plate |
Skeleton under the table: | 5*10mm |
Link hinge: | 12mm thick open hinge |
Connection shaft: | Shaft diameter 20mm |
Adjustment range: | +150/-100mm |
Anti-collision rubber size | 200*300*110mm |
Safety foot guard: | Without |
Adjustment time: | Rise and fall for 5 seconds |
Surface treatment: | The surface is pickled, derusted and sandblasted, and the antirust paint, primer and topcoat are sprayed with automatic spraying equipment, and the thickness of the paint layer is 0.1mm. |
Hydraulic oil tank capacity: | 5L |
Mechanical Edge of Dock Leveler
No power required
No need to reserve a foundation pit, saving space
Stable performance and simple operation
Factories, workshops and warehouses which are especially in the field of food, supermarkets, assembly, logistics, warehousing and etc.
Suitable for when the difference in truck and dock heights is small
The lip plate is lifted to the rear of the truck
Use shot blasting to remove rust and electrostatic spray to enhance corrosion resistance and adhesion
Provide cost saving on equipment maintenance, fragile goods damage and personal injuries
Do not need to reserve pits, supply power, just wall mounted
content is empty!